Wednesday, October 5, 2011

Heating a house just one degree!



Here’s a graph of the power needed to raise the temperature in my home from 68F to 69F that was part of an experiment just prior to the heating season for 2011. Notice the second stage kick in? It also too half an hour to accomplish the feat! It’s early October and the temperatures in the mornings are only dipping down to the low forties. So for now, I can get along with very limited use, but come November I’ll have that baby cranking pretty much full time!

Last winter, I had the thermostat set at 69F and was able to live with that as long as I had a couple of space heaters going in key rooms. The wintertime is by far the most expensive season in terms of electricity used. Here is a list of the power used lat season starting with November:

Nov 2010        1734
Dec 2010         2282
Jan 2011          2049
Feb 2011         1359

Believe it or not this was much better than the season before by about 15%. I think the reason for this is that heat pumps become less efficient as the outside temperatures get much below 32F. More and more often then the ‘auxiliary’ or ‘emergency’ heat kicks on which are a set of heating coils in the furnace itself. This form of heat is much less efficient and can really racks up the energy cost. However, if you are selectively heating some rooms with portable space heaters, you are helping to actually reduce your overall heating bill. That’s my theory anyway.

This year, some weather watchers are forecasting colder than normal temperatures. If that happens, I will be able to see how well I do.

Using space heaters to save on heating costs.

If you’re a person that hates paying high electric bills, then the later fall months are the best in that regard. I’ve been able to go for half of September and all of October so far with both the AC and furnace turned off. For those occasional cool mornings, I’ve bought a couple of space heaters which are doing a nice job so far. I have one in my bedroom and one in the living room. At this time, I’m turning them on manually but plan to get a couple of timers so they can be set to turn on at about 4AM.

The jury is still out as to how effective these devices are in reducing heating costs. To that end, I’m planning on performing a little bit of research this coming winter to find out. Right now I have two types of heater; a resistive element type and a ceramic heater. Within the next couple of weeks I plan on purchasing an oil filled radiator type to round out the selection. These will be strategically placed in the house and timed so they turn on early to bring select areas up to 72F. The central furnace will be set for 60F. I will then watch to see how much I suffer, and or, how much electricity is saved…or not. This effort will more than likely end up as a You Tube video at some point.

Friday, September 16, 2011

A word on solar panel systems!


I've rarely been accused of brevity, but in the case of solar energy, I will exercise it now; in just two words, don't bother.

I've investigated home solar energy schemes for some time. It's a great concept after all; free power from the sun! Who wouldn't want that?

The problem is, there are only two ways the typical homeowner can go; either build a cheap crappy system (Power4Home and Earth4Energy come to mind), or invest in a high quality (read mega buck) system that might pay for itself twenty years down the road.

My advice is to stay away from solar (and wind power for that matter) until such time as the overall quality-performance to cost ratio vastly improves. When you see the companies that are in the business of making these panels fail left and right, there just may be a problem.

You would probably be better off in the long run by spending your time and money on lobbying your local power provider for lower rates! It also couldn't hurt to write or email your congressperson to suggest they stop building weapons of war and maybe switch to making cheap power available to everyone. Who knows, America might just rise again?

Monday, September 12, 2011

Just in case this winter is a doozy!


My hippie-dippie weather forecast post (US Long Range Winter Weather Forecast for 2011-2012) calls for things to possibly get a little on the extreme this coming winter, so I’ve begun to think of ways I might be able to save on electricity.

My first thought, and one that is running out front at the moment, would be to pack my bags and head for the Florida Keys. I seem to remember seeing efficiency apartments for a reasonable price if I were to rent by the month. Yes, Florida is my first choice.

My second choice will be to move down into my basement where I have a small bedroom that can be cheaply heated with a small room heater while the rest of the house’s thermostat is set back to the mid fifties. I could then pretend I was a Inuit Eskimo living in a small igloo who ate seal blubber and smelled accordingly.

That, so far, are my two well thought out plans should the temps really go crazy. Then again, I guess I could just set the thermostat to 80 and watch my electric meter go wild! More to come on this topic as it gets later in the year!

Friday, September 9, 2011

Crosley washing machine energy use profile!


As part of my group of entries depicting individual energy users, I decided to check the energy graph of running my Crosley washing machine set to medium load, warm cold cycle on 10 minute wash.

The graph, as you can see shows the machine running and using about 700 to 800 watts to run the motor while the rest of the early graph represents the water heater tank recovery cycle.

While I did not calculate the overall cost of one run of laundry, I can guess that it was only a few pennies. Surprisingly the dryer didn’t use all that much energy either (see post).

Sear Kenmore 70 series dryer electrical use profile.



Referring to the graph, the baseline energy use with most everything in the house tuned off is somewhere between 300 to 400 watts. Occasionally, the refrigerator compressor will come on adding about 200 watts to this for ten minutes or so. In the graph you can spot the ‘surge’ as the three phase motor kicked in. This unit uses sensor to step down the heat as it senses that the humidity on the dryer goes down.

I began the run at 11:17 AM and it finished at 11:43 for a total of 26 minutes. As you can see the unit used about 3 kilowatts of power over this time which still only amounts to about 30 cents worth of electrical power.

Energy profile for the cost of a quick shower!


Out of curiosity, I monitored the electrical usage incurred when I too a quick shower. The total time of the show was about six minutes. As the graph shows at about 9:35 AM the 40 gallon GE electric water heater kicked in. It used an average of 5 kWh of power for a period of six minutes to reheat the water I had used. At ten cents a kilowatt hour, I figured my cost to be less than a penny.

As almost an afterthought, I went down to the basement where the unit is located and covered about three fourths of the tank with insulation that was R rated a value of 4.0. I’m not very confident that doing this will result in much in the way of savings, but I figured it couldn’t hurt.